M1 Dealer Site  
Search

Any term All terms

Main Menu
Home
FAQs
Bulletin Board (Forums)
Site Search
Downloads **
Email Elk Tech Support
M1 Training Videos
RP Training Videos
XEP Training Videos
XSP Training Videos
Webinar Training Videos
Go to Main Elk Website

View Topic
Forums :: ELK-RM "Software for User Remote Control" :: Upgrading to ElkRMS on TS07

| Reply Reply |
Upgrading to ElkRMS on TS07
Posted by h0mebrew on 02/04/2009 03:48 PM

Am I correct in understanding that the only way to upgrade the touchscreen is via a compactflash card? Or is it possible to simply use a USB flash drive and install it? CF cards are cheap, but I'd like to know my options before beginning the install process. Also, not knowing much about Windows CE, is compactflash memory recognized by the OS as additional system memory or is it seen as an external disk drive like a USB flash drive?

Re: Upgrading to ElkRMS on TS07
Posted by KBP on 02/04/2009 06:05 PM

The only way to upgrade to the new RMS is by Compact Flash Card. The RMS software is on our website so you can either download it and store it onto your own CF card (make a folder titled "ELKRM" and copy all files there), or you can purchase it already loaded on a CF card. Your choice. RMS will not run from the on-board memory in the TS07, it has to be on a CF card.

Edited by KBP on 02/05/2009 08:08 AM

Re: Upgrading to ElkRMS on TS07
Posted by h0mebrew on 02/04/2009 06:33 PM

Thanks for clarifying. I'll probably go with the 2GB size since that was the largest recommended size. I doubt the CE device would take advantage of more memory anyway.

Re: Upgrading to ElkRMS on TS07
Posted by ifarrison on 02/06/2009 09:09 PM

I've used the 4GB cf cards with no issues.. I had a hard time finding a 2 gigger.

Re: Upgrading to ElkRMS on TS07
Posted by foygroup on 02/15/2009 12:29 PM

There is a CF card slot on the TS07? Where is it located? There is a USB port on the face of the unit. Do I have to crack open the case to get to an internal CF card slot? Please let me know. Thanks,

Re: Upgrading to ElkRMS on TS07
Posted by bradweeks on 02/15/2009 01:24 PM

Please take a look at the following links for more information and instructions: http://www.elkproducts.com/products/m1/ElkRMS_Download_for_CF.htm

http://www.elkproducts.com/pdf/Install_CF_on%20TS07.pdf

Edited by bradweeks on 02/15/2009 01:26 PM

Re: Upgrading to ElkRMS on TS07
Posted by foygroup on 02/16/2009 12:28 PM

Brad, Thanks that worked fine. I used a 128mg as shown and it worked fine.

| Reply Reply |