|
| View Topic |
Forums
:: ElkRP "Software for Installer Programming"
:: New ELK RM sftwe
|
 Reply |
| New ELK RM sftwe |
Posted by mzn50 on 03/13/2006 04:49 PM
Anyone has been successful in making a connection ?.. I can't seem to get it to connect over the network.. I have entered the ip address and port address of 2601 that matches ELKRP.. I did get it to the sync section but nothing after..
Anyone also notice in the documentation it says ...ELK TS07 Touchscreen Edition ? .. ummm.. what is that and when do we see it ?
thanks
|
| Re: New ELK RM sftwe |
Posted by bradweeks on 03/13/2006 05:30 PM
Try changing the Port from 2601 to 2101. Also please remember the software requires product license key for full functionality. Product license key may be purchased from your Authorized ELK Reseller. Software runs in DEMO mode until product license key is entered into ElkRM.
|
| Re: New ELK RM sftwe |
Posted by mzn50 on 03/14/2006 02:49 PM
I changed to 2101 on ELKRP .. ELKRM does not want to hook up at 2101 either..?? ..thanks
Edited by mzn50 on 03/14/2006 03:34 PM
|
| Re: New ELK RM sftwe |
Posted by hoffpauir on 03/14/2006 06:34 PM
Same thing here. I can't get it to connect no matter what port I use.
|
| Re: New ELK RM sftwe |
Posted by cwhitworth on 03/14/2006 06:38 PM
In ElkRP, go into your XEP settup screen where you assign the IP address and port number. Verify that port "2101" is enabled. This will be on the "TCP/IP Settings" tab. You will see a checkbox labeled "Enable Non-Secure Port". Make sure this is checked and the port number is set to 2101.
|
| Re: New ELK RM sftwe |
Posted by nadeau2000 on 03/14/2006 09:53 PM
I have a connection and like what I see.
If you use a user name and password for the M1XEP you will have to remove them in order for the ELKRM software to connect.
Edited by nadeau2000 on 03/14/2006 09:55 PM
|
| Re: New ELK RM sftwe |
Posted by mzn50 on 03/14/2006 11:40 PM
Thanks cwhitworth/Nadeau2000 .. worked..
It is nice..So.. what is the value of ELKRM over the previous virtual screen we had .. ? apart from the ability of using it on a hand held device ?
|
| Re: New ELK RM sftwe |
Posted by cwhitworth on 03/15/2006 06:26 AM
Being that ElkRM is a program and all of the settings are stored locally, you can see that it is a lot faster loading. The software will run on our future touchscreen, PC's, and some PDA's. This keeps the user from having to learn many different softwares that have the sole purpose in life of doing the same thing. Being that this program resides on a PC, we have a bit more storage then the Ethernet module. This gives us the ability to make the graphics better and as well allow you to change the graphics. ElkRM also has the ability to look at the event log, change/view "Custom Setting" values, and provide quick links to other programs/web pages (Consult manual). ElkRM is not designed to eliminate the Java web page in the M1XEP. If you are out of town and want to access your home from a PC that does not have ElkRM, you still have the Java web page! We have all kinds of great ideas for the ElkRM software in the future, make sure you tell us yours!
|
| Re: New ELK RM sftwe |
Posted by djenkins6 on 04/24/2006 05:43 PM
works great on my ipaq h2210, with socket sd lan card. I was going to buy a new pda with 480*640 screen but then I remembered I had bought nyditot way back and set the resolution. I installed compact .net framework on sd card. Elkrm will only install in main memory, could we have an option to install on sd card so if you let battery run down it will be ok.
I'm having problem setting up links on the ipaq, will only let me add folders under links, any suggestions?
David
|
| Re: New ELK RM sftwe |
Posted by djenkins6 on 04/24/2006 05:45 PM
PS. I didn't have to remove the user name and password
|
| Re: New ELK RM sftwe |
Posted by cwhitworth on 05/02/2006 07:14 PM
You can try to copy the ElkRM folder on to your compact flash drive. I have done this in the past on touch screens. It should run fine... Let us all know what you find! Just remember that it will still require you to reinstall the .NET compact framework vs. 2.0 if it gets erased as well...
You should be able to create a shortcut to a web page on your PC to a web page and copy it into your Links folder on to your PDA using Activesync.
Edited by cwhitworth on 05/02/2006 07:17 PM
|
| Re: New ELK RM sftwe |
Posted by cparth on 09/23/2006 11:43 AM
Help, i'm using the ElK Touchscreen lc 700 with ElkRm for Ce.
But i cant connect, no matter what port i use. i enebled 2101 unsecure, i checked all comm configs in elk rp, but i always get the same error: user code not valid.
Anyone help please?
|
|
Reply |
|
|
| What's Related |
| These might interest you as well
FAQ
Form Generator
Documents
Web Pages
|
|
