M1 Dealer Site  

Any term All terms

Main Menu
Bulletin Board (Forums)
Site Search
Downloads **
Email Elk Tech Support
M1 Training Videos
RP Training Videos
XEP Training Videos
XSP Training Videos
Webinar Training Videos
Go to Main Elk Website

View Topic
Forums :: M1 & M1EZ8 Controls :: Abiltity to trigger a DVR?

| Reply Reply |
Abiltity to trigger a DVR?
Posted by Jeramie on 04/21/2011 02:14 AM

I have an M1 Gold installed in a house with a Ganz Digimaster DR8HD and am curious if I can enable the M1 to trigger the Ganz DVR. The DVR appears to have "alarm" inputs that are monitoring an open or closed connection. I can't find anything in the documentation of the M1 that would provide this type of output. Has anyone done this?

Re: Abiltity to trigger a DVR?
Posted by bradweeks on 04/22/2011 10:14 PM

Output 3 on the main board is a Form "C" Dry Contact Closure which can be configured as N/C or N/O. You will need to write a Rule to control Output 3 when you need the M1 to trigger the DVR. If additional relays are needed J16 on the M1 main board can be converted into 8 Form "C" relays by using the M1RB. If more Outputs are needed use the M1XOVR ((8 Form "C" and 8 Low Voltage 12 VDC 50 ma each))

| Reply Reply |