|
| Welcome To The ELK M1 Dealer Website |
This site was set up to provide support to the Professional Trade "Dealer/Installers" on the ELK-M1 Cross Platform Controls, as well as for the ElkRP PC Software. Visitors can browse the Frequently Asked Questions, read Bulletin Board posts, and email Elk Technical Support.
A Dealer Login and Password is required to access the items marked with **. Registered Dealers with an Account Logon may click on the "Downloads" link to obtain the latest firmware and/or software revisions. If you are a Professional Installing Dealer and would like to apply for a Dealer Login and Password, click on "New Account Signup" in the lower left corner of this screen. The information will be verified and screened. If approved, a password will be emailed to you.
* * * CURRENT RELEASED FIRMWARE VERSIONS * * *
- Elk M1 & EZ8 Control Firmware Version 4.5.24 released 1/18/10
- Elk M1 & EZ8 Control Firmware Version 5.1.24 released 1/18/10
- Elk-M1XEP Ethernet Expander Firmware 1.3.10 released 1/18/10
- Elk-IP232 IP to 232 Adapter Firmware 1.0.16 released 1/18/10
- Elk-RP2 Software for PC - Ver 2.0.4 released 1/11/10.
- Elk-M1XRF2G Wireless Receiver Firmware Version 1.0.26 released 5/5/09
- Elk-M1XSP Serial Expander Firmware (various versions) released 1/21/09
- ElkRMS Remote Management Software 2.0.2 released 06/12/09 use this link.
- Elk-M1KAM Access Module Firmware 1.1.2, Bootware 1.2.0 released 10/16/07
- Elk-M1KP Keypad Firmware 2.1.48, Bootware 3.0.14 released 3/20/07
- Elk-M1KPAS Arming Station Firmware 1.0.8 released 2/20/07
NOTE: Upgrading of firmware is optional and is suggested on an as-needed basis only. Always review the firmware release notes to determine what has been added or changed, then make your decision accordingly.
To contact us by mail or telephone:
ELK Products, Inc.
PO Box 100
Hildebran, NC 28637
(828) 397-4200
Created on 05/27/2004 02:02 PM by teduncan
Updated on 01/21/2010 08:49 AM by ans1020
|
|
|
|
|
